EnricoBruno

The items you find are only part of our catalog. We are in the process of completing the insertion

Code T6745150

Vertical laboratory autoclave mod. Lab 150

Description

Vertical floor autoclave with useful capacity of the sterilization chamber of 140 liters.

The sterilization chamber and the lid are made of AISI 316 stainless steel, internally mechanically mirror polished.

The sterilization cycle is microprocessor controlled and fully programmable: the sterilization temperature and time can be defined by the user between 101 ° C and 138 ° C and from 1 to 99 minutes respectively.

The control system allows to memorize up to 100 different sterilization cycles.

The autoclave has a built-in printer-plotter in order to easily check and validate the cycle performed.

A built-in vacuum pump and a bacterial filter allow the autoclave to safely and quickly eliminate possible air bubbles in the chamber and avoid bacterial contamination of the environment.

The vent vapors, after being sterilized, are condensed and conveyed into a special container.

General features

Kind	Vertical floor-standing autoclave with automatic sterilization cycle
Maximum capacity	About 140 L
External structure	Fire-painted steel / AISI 304 stainless steel on request
Work plan	AISI 304 stainless steel
Sterilization chamber	Cylindrical, in AISI 316L stainless steel, with mechanical cleaning and mirror polishing - 0.7 micron finish
Cover	AISI 316 L stainless steel with mechanical cleaning and mirror polishing, 0.7 micron finish, with central closure and equipped with a safety device against accidental opening, with double-lip gasket.
Useful dimensions	Internal dimensions: 500 x 765 mm (Ø xh)
Plotter printer	Included, to print the text and the graph of the sterilization cycle and alarm states
Keyboard	Touch type, prot. IP66, waterproof
Display	Digital with continuous indication of the status and parameters of the sterilization cycle
Temperature probes	Two thermal sensors, one of which can be freely positioned, according to the specific needs of the user, inside the sterilization chamber, for the control of the sterilization cycle, the second is used for the control of the heating resistances.
Vapors and exhaust air	Collected in a waste tank, avoiding the loss of liquids and bad smells. The exhaust vapor is filtered by a bacterial filter in order to preserve the safety conditions of the external environment.
Water discharge	A tap that can be activated from the Console allows the water present in the sterilization chamber to be drained, in order to facilitate chamber cleaning operations.
Vacuum pump	Included

Sterilization cycle specifications

Sterilization cycle	Electronic control through microprocessor.
Programmable parameters	Sterilization temperature: from 101 ° C to 138 ° C Sterilization time: from 1 to 99 minutes
Max. Working pressure	2.5 bar, at 138 ° C
Max design pressure	3.0 bar at 142.9 ° C
Hydraulic test	5 bar
Temperature accuracy	± 0.25 ° C to 121 ° C
Sterilization programs	No. 15, fully programmable
Heating system	Direct via heating resistor

Control systems and safety devices

Safety devices

Active safety: The lid is safe as long as the chamber is under pressure, even in the event of a black-out during the execution of the cycle. The lid attachment system can only be deactivated when the chamber temperature is below 90 ° C
Hydraulic safety valve (opening and closing of the drain) in case of overpressure
Maximum pressure switch
Lid closing switch

Control systems

Working temperature and sterilization time
Manometer to indicate the pressure with a range from 0 to 4 bar
Acoustic and visual alarm in case of malfunction
Check for the presence of sufficient water
Overpressure

Working conditions

Temperature	From +15 to + 40 ° C
Relative humidity	10 ¸ 85% RH

Other data

Electrical feeding	3 phases, 400 V + G + N, 50 Hz; ± 10%
Power	6.5 KW
External dimensions	830 x 990 x 1400 mm (L x W x H)
Weight	200 Kg
Packaging dimensions	980 x 1140 x 1500 mm (L x W x H)) approx.
Weight with packaging	250 Kg

Optional accessories

T6150CT1	Perforated AISI 304 stainless steel basket with dimensions 465 x 315 mm (Ø xh) (max cap n.2)
T6150MAN	Quick cooling system
T6150DRY	Automatic drying system at the end of the sterilization cycle

Regulations

European directives

Directive 2004/108 / EC referring to EM compatibility

Directive 2006/95 / on the approximation of the laws of the Member States relating to electrical equipment intended for use within certain voltage limits

Machinery Directive 2006/42 / EC

Directive 97/23 / EC concerning pressure vessels (PED)

European regulations

EN61010-1 Safety requirements for electrical equipment for measurement, control and for use in the laboratory. General requirements.

EN61326-1 Electrical equipment for measurement, control and laboratory. Electromagnetic compatibility requirements. Part 1: general requirements. EMC requirements.

EN60204-1 Safety of machinery. Electrical equipment of machines P. 1: general rules

CONTACTS

ENRICO BRUNO s.r.l.
Via Duino 140
10127 Torino Italy
Tel. +39 011 3160808
Fax +39 011 3160753
PEC pec@pec.enrico-bruno.it
CF/P.IVA: 04891320014

WRITE TO US

For orders, prices requests and offers, technical service commerciale@enrico-bruno.it
For administration service amministrazione@enrico-bruno.it
For Direction – Purchase Department acquisti@enrico-bruno.it

COMPANY

Company
Maps
Contact Form

Code T6745150

Vertical laboratory autoclave mod. Lab 150

CONTACTS

WRITE TO US

COMPANY

FOLLOW US